Specifications - Sony HT-DDW970 Operating Instructions Manual

If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver's memory may remedy the
problem (page 17). However, note that all
memorized settings will be reset to their factory
settings and you will have to readjust all settings
on the receiver.
If the problem persist
Consult your nearest Sony dealer.
Reference sections for clearing
the receiver's memory
To clear
All memorized settings
Customized sound fields
GB
52

Specifications

Amplifier section
Power Output
(6 ohms 120 Hz – 20 kHz, THD 0.09%)
FRONT
CENTER
SURR
SURR BACK
(6 ohms 1 kHz, THD 0.7%)
FRONT
CENTER
SURR
SURR BACK
(6 ohms 1 kHz, THD 10%)
See
FRONT
page 17
CENTER
page 35
SURR
SURR BACK
1) Measured under the following conditions:
240 V AC, 50 Hz
2) Depending on the sound field settings and the
source, there may be no sound output.
Inputs (Analog)
MULTI CH IN,
SA-CD/CD, MD/TAPE,
DVD, VIDEO 1, 2, 3
Inputs (Digital)
DVD (Coaxial)
VIDEO 2, SA-CD/CD
(Optical)
Outputs (Analog)
MD/TAPE (OUT),
VIDEO 1 (AUDIO OUT)
SUB WOOFER
Reproduction frequency range:
Tone
Gain levels
1)
2)
: 50 W/ch
2)
: 50 W
2)
: 50 W/ch
2)
: 50 W
2)
: 60 W/ch
2)
: 60 W
2)
: 60 W/ch
2)
: 60 W
2)
: 100 W/ch
2)
: 100 W
2)
: 100 W/ch
2)
: 100 W
Sensitivity: 800 mV
Impedance: 50 k ohms
Sensitivity: –
Impedance: 75 ohms
Sensitivity: –
Impedance: –
Voltage: 800 mV
Impedance: 10 k ohms
Voltage: 2 V
Impedance: 1 k ohm
28 – 20,000 Hz
±6 dB, 1 dB step