Technical Data; Save All Warnings And Instructions For Future Reference; General Power Tool Safety Warnings - DeWalt DW810 Instruction Manual

EN GLI SH
ANGLE GRINDERS
DW803, DW810, DW812
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

DW803
Voltage V 220–240
V 115
Type 7
Power input W 800
No-load speed/rated
speed min -1 10,000
Wheel diameter mm 100
Spindle diameter M10
Weight kg 1.87
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
4

General Power Tool Safety Warnings

DW810 DW812
220–240 220–240
SAVE ALL WARNINGS AND INSTRUCTIONS
– –
7 6
The term "power tool" in the warnings refers to your
680 800
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
11,000 10,000
1) WORK AREA SAFETY
100 115
a)
M10 M14
1.87 2.0 b)
c)
2) ELECTRICAL SAFETY
a)
b)
c)
d)
WARNING: To reduce the risk of injury,
read the instruction manual.
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious
injury.
FOR FUTURE REFERENCE
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.