Controls And Displays (Network Audio Player: N-P01); Front Panel - Pioneer N-P01-S Operating Instructions Manual

1
1

Controls and displays (Network audio player: N-P01)

Front panel

l
STANDBY/ON
5 V 2.1 A
1 2 3
1
STANDBY/ON button
Switches the player between standby and on (page 14).
2
USB terminal
Use to connect your USB mass storage device or iPod/
iPhone/iPad as an audio source (page 12, 20).
3
Display
See Display below.
4
Remote sensor
Receives the signals from the remote control (page 5).
5
SOURCE
Select the input source (page 14).
6
Playback control button
Select the desired track or folder to be played back. Use  to
stop the playback. Use / to stop playback or resume
playback from the pause point.
10
Display
N-P01
NETWORK AUDIO PLAYER
SOURCE
 
 
3
4 5 6
1
Input source
2
Network connection status
When the player is connected to the wired network,
this indicator lights (page 12).
When the player that is connected to the LAN cable is
not connected to the network, this indicator lights. When
the LAN cable is not connected to this player, this
indicator does not light (page 12).
When the player is connected to the wireless network,
this indicator lights. Depending on the strength of
wireless signal, the icon changes in five steps (page 12).
When the player is not connected to the wireless
network, this indicator lights (page 12).
Displayed when the wireless network settings for the
player are still set to their initial settings. See (page 21) for
details on performing wireless settings.
3
Name of file/track/artist/album/station, etc.
4
Artwork
Displayed when the currently playing file includes an album
jacket image, etc.
1 2
iPod/USB
Song 1
Artist
4
7
Album
5
7
44:38 - 44:02
6
5
Repeat and Shuffle
Repeat all files.
Repeat a file.
1
Shuffle
6
Play status
Displays the play status. The play status differs depending on
the input source.