Text Display Selection; Display Type C&D - Kenwood KDC-MP635 Instruction Manual

Text Display Selection

— Display Type C&D—
Changing the text display.
1
Enter Text Display Selection mode
Using the Control knob, select "DISP" > "TEXT".
For the operation method, refer to <Function
Control mode> (page 10).
2
Select the text display part
Push the Control knob towards up or down.
The cursor (‰) moves to the selected text display
part.
Select the text
Turn the Control knob or push it towards left
or right.
See <The text display> (page 14).
Upper text display part: Information of condition
column "4" is displayed.
Middle text display part: Information of condition
column "5" is displayed.
Lower text display part: Information of condition
column "6" is displayed.
3
Exit Text Display Selection mode
Press the Control knob.
⁄
• When LX-AMP is connected, the item setup by the
Display mode of LX-AMP is displayed. (KDC-X791)
• When the music number exceeds 1000, only the last 3
digits of its number are displayed. (KDC-X791/MP735U)
• Album name cannot be displayed in WMA file. (KDC-
MP635)
• Music title, Artist name, and Album name cannot be
displayed in WAV file. (KDC-X791/MP735U)
• When playing music from iPod or music edited by "Music
Editor", the folder name display may show something
different such as playlist or artist name depending on
the music selection procedure. (KDC-X791/MP735U)
• Same information cannot be displayed in Upper text
display part, Middle text display part and Lower text
display part. However, the blank display is able to have
multiple selections.
• In the upper text display part, alternate information is
displayed when display without information is selected.
• In the middle text display part, the Kenwood logo is
displayed if the contents of the information cannot be
displayed. However, in the HD Radio source part, the
display becomes blank.
• In the lower text display part, no information is displayed
when display without information is selected.
13
|
English