Amp Control; Traffic Information - Kenwood eXcelon KDC-X991 Instruction Manual

When LX AMP unit connecting

AMP Control

You can control the LX AMP connected to the unit.
1
Select AMP Control mode
Turn the Control knob.
Select the "AMS Control" display.
2
Enter AMP Control mode
Press the Control knob for at least 1 second.
3
Select the AMP Control item for adjustment
Push the Control knob towards up or down.
⁄
• For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP.
4
Adjust the AMP Control item
Push the Control knob towards right or left.
5
Exit AMP Control mode
Press the [FNC] button.
⁄
• You cannot use the LX AMP operation during standby
mode.
Other than Standby mode

Traffic Information

Switching to traffic information automatically
when a traffic bulletin starts even when you are not
listening to the radio.
Display Setting
"TI : OFF" The Traffic Information function is OFF.
"TI : ON" The Traffic Information function is ON.
When a traffic bulletin starts, "Traffic INFO" is
displayed it and it switches to traffic information.
⁄
• During reception of an AM station when the Traffic
Information function is turned ON, it switches to an FM
station.
• During reception of traffic information the adjusted
volume is automatically remembered, and the next time
it switches to traffic information it's automatically the
remembered volume.
Receiving other traffic information stations (In
tuner source)
Push the Control knob towards [4] or [¢].
⁄
• You can change the traffic information station when
listening to the radio.
In FM reception
CRSC (Clean Reception System Circuit)
Temporarily have reception alternate from stereo to
mono to reduce multi-path noise when listening to
the FM station.
Display
"CRSC : ON"
"CRSC : OFF"
⁄
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
Setting
The CRSC is ON.
The CRSC is OFF.
49
|
English