Av Input Setup; Av Output Interface Setup - Kenwood DDX8036BT Instruction Manual

Setup Menu

AV Input Setup

AV Input Setup
You can set AV input parameters.
1 Display the AV-IN Setup screen
> >
Touch [ ] [
(page 67)
2 Set each item
[AV-IN Interruption] Sets an image
display of the system that is connected
via the AV INPUT port. (
"OFF": When the image source is
switched, an image entered via the AV
INPUT port is displayed.
"ON": When an image signal is entered
via the AV INPUT port, this image is
displayed.
[iPod AV Interface Use] Sets the
terminal which iPod is connected.
( "iPod")
[AV-IN1 Name], [AV-IN2 Name], [AV-IN3
Name] Sets a name to be displayed
when you select a system that is
connected via the AV INPUT port.
( "VIDEO")
⁄
• [iPod AV Interface Use]
This item can be set when in STANDBY source
and also the iPod is disconnected.
• [AV-IN Name]
Two AV-IN names are displayed when "iPod" is
selected in [iPod AV Interface Use] and three are
displayed when not selected.
• [AV-IN3 Name]
DDX8 series only
80 DNX series DNX7360BT/ DNX7360BTM
> >
] [AV-IN SETUP].
"OFF")

AV Output Interface Setup

AV Output Interface Setup
You can set AV output parameters.
1 Display the AV-OUT Interface screen
> >
Touch [ ] [
Interface]. (page 67)
2 Set each item
[AV-OUT] Selects an AV source to be
output at the AV OUTPUT port.
( "OFF")
> >
] [AV-OUT