Page 1
OBJ_BUCH-420-002.book Page 1 Tuesday, August 23, 2011 12:08 PM Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen PFS 105 E Germany www.bosch-pt.com 1 609 929 Y14 (2011.08) PS / 194 UNI de Originalbetriebsanleitung el Ðñùôüôõðï ïäçãéþí ÷ñÞóçò sr Originalno uputstvo za rad en Original instructions Orijinal işletme talimat...
Page 2
OBJ_BUCH-420-002.book Page 3 Tuesday, August 23, 2011 12:08 PM PFS 105 E Bosch Power Tools 1 609 929 Y14 | (23.8.11)
Page 3
OBJ_BUCH-420-002.book Page 4 Tuesday, August 23, 2011 12:08 PM 1 609 929 Y14 | (23.8.11) Bosch Power Tools...
Page 4
OBJ_BUCH-420-002.book Page 5 Tuesday, August 23, 2011 12:08 PM 5-15 cm Bosch Power Tools 1 609 929 Y14 | (23.8.11)
Page 5
OBJ_BUCH-420-002.book Page 6 Tuesday, August 23, 2011 12:08 PM 800 ml 600 ml 1 609 929 Y14 | (23.8.11) Bosch Power Tools...
Use of a cord suitable for outdoor use reduces the risk of electric shock. When operating the power tool in damp/moist environ- ments is unavoidable, use a residual current device 1 609 929 Y14 | (23.8.11) Bosch Power Tools...
Products sold in AUS and NZ only: Use a residual current de- vice (RCD) with a rated residual current of 30 mA or less. Bosch Power Tools 1 609 929 Y14 | (23.8.11)
Article number 3 603 B06 2.. Rated power input Spraying capacity g/min Atomising output 0–105 Robert Bosch GmbH, Power Tools Division D-70745 Leinfelden-Echterdingen Required time for application Leinfelden, 22.08.2011 of paint on 5 m Container capacity for spray Assembly material...
– Fill the spray material into the container and screw the con- When coating material builds up on the nozzle and air cap, tainer firmly to the spray gun. clean both parts with the corresponding solvent. Bosch Power Tools 1 609 929 Y14 | (23.8.11)
– Clean the outside of the container and the spray gun with a cloth moistened in paint thinner. – Unscrew the union nut 3 and the air cap 2. 1 609 929 Y14 | (23.8.11) Bosch Power Tools...
Spray material drips from the Build-up of spray material on nozzle 11 and Clean nozzle and air cap nozzle air cap 2 Nozzle 11 worn Replace nozzle Nozzle 11 loose Tighten union nut 3 Bosch Power Tools 1 609 929 Y14 | (23.8.11)
Page 12
Robert Bosch Australia Pty. Ltd. turing and testing procedures, repair should be carried out by Power Tools an after-sales service centre for Bosch power tools. Locked Bag 66 Clayton South VIC 3169 In all correspondence and spare parts order, please always in-...