Table of Contents
Advertisement
yyy
;;;
[ FULL ]
yyy
;;;
;;;
yyy
[ NORMAL ]
yyy
;;;
NOTE
You cannot operate when the navigation picture is displayed.
<When the KTC-V800N or KTC-V800P is connected>
Adjusting the Picture Quality
1
Press the SCRN button, the picture quality adjustment screen to be displayed.
2
Each time you press the SCRN button, the adjustment item can be selected..
3
Press the [ 2 ] or [ 3 ] button to adjust the value.
[BRIGHTNESS] (for Day time screen)
Press the [ 3 ] button for a brighter screen.
Press the [ 2 ] button for a darker screen.
[TINT]
Press the [ 3 ] button for a stronger green level.
Press the [ 2 ] button for a stronger red level.
[COLOR]
Press the [ 3 ] button for a deeper color.
Press the [ 2 ] button for a paler color.
[DIMMER] (for Night time screen)
Press the [ 3 ] button for a brighter screen.
Press the [ 2 ] button for a darker screen.
[CONTRAST]
Press the [ 3 ] button for stronger contrast.
Press the [ 2 ] button for less contrast.
[BLACK LEVEL]
Press the [ 3 ] button for less black level.
Press the [ 2 ] button for a stronger black level.
NOTE
• The [ TINT ] cannot be adjusted for the picture of PAL.
• The [ TINT ] and [ COLOR ] cannot be adjusted for the navigation picture.
• [BRIGHTNESS] and [DIMMER] initial values are maximum.
• As regards [DIMMER] adjustment:
• When the condition is bright around the periphery of the monitor unit, the brightness does
not change even when [DIMMER] is adjusted.
• When set to maximum, even if the monitor unit periphery dims, there is no change in from
the brightness set with [BRIGHTNESS].
• There is no connection with the vehicle's illumination switch. (A sensor is installed facing the
front of monitor unit for light detection).
• If you make no key operation for 10 seconds, the picture quality adjustment screen is
automatically cancelled.
;;;
[ ZOOM ]
;;;
[ CINEMA ]
yyy
;;;
[ JUST ]
yyy
;;;
SCREEN CONTROL
BRIGHTNESS
TINT
COLOR
DIMMER
CONTRAST
BLACK LEVEL
-
+
5
Advertisement
Table of Contents
