Table of Contents
Advertisement
8
When [Type 1] is selected: Enter a name for the
preset position, and click [Add New]
The preset position is set and added to the list.
9
Click [OK]
Note:
● The position at the top of the list corresponds to Preset
Position 1.
● The number of preset positions that can be registered
may differ according to the camera in use.
● To test the defined preset position, click [Test]. You can
check the position on the screen.
To change the order of the list
Select a preset to change the order from the list and click
[
] or [
]
To modify a preset position
Select a preset to modify from the list and modify the position
in the [PTZ preview] screen. Click [Set New Position] to
modify the preset position.
To delete a preset position
Select a preset to delete from the list and click
Note:
● Do not insert space at the beginning of the preset position
name. Such preset positions may not work.
Auto PTZ Patrolling
PTZ patrolling is a feature that enables automatic movement
of a PTZ camera between several preset positions.
Caution:
● To define a patrol scheme, you must specify at least two
preset positions. You must also specify the PTZ patrolling
schedule of any camera in [Advanced Configuration]B
[Scheduling and Archiving] (A Page 119).
1
Click [+] in [Advanced Configuration]
2
Click [+] in [Hardware Devices] and click [+] for
the hardware device name of a PTZ camera
[
]
Delete
.
41
Advertisement
Table of Contents
