Listening To The Other External Components - Kenwood KDC-208U Instruction Manual

Listening to the other external
components
Preparation : Make sure [ON1] or [ON2] is selected for [BUILTIN AUX]. (page 6)
1 Press SRC to select "AUX."
2 Turn on the external component and
start playing.
3 Turn the volume knob to adjust the
volume.
Maintenance
Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to
observe this precaution may result in damage to the monitor or unit.
Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a
cotton swab or cloth.
Handling discs
Do not touch the recording surface of the disc.
Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
Do not use any accessories for the disc.
Clean from the center of the disc and move outward.
Clean the disc with a dry silicon or soft cloth. Do not use any solvents.
When removing discs from this unit, pull them out horizontally.
Remove the rims from the center hole and disc edge before inserting a disc.
12
Portable audio device
(optional accessory)
Auxiliary input jack
3.5 mm (3/16") stereo mini plug
(optional accessory)