Download Print this page
Sanyo VCB-9312P Instruction Manual
Sanyo VCB-9312P Instruction Manual

Sanyo VCB-9312P Instruction Manual

B/w ccd camera

Advertisement

Quick Links

INSTRUCTION MANUAL
BEDIENUNGSANLEITUNG
MANUEL D'INSTRUCTIONS
B/W CCD Camera
CCD-Schwarzweißkamera
Caméra CCD Noir et Blanc
CCD
About this manual
Before installing and using the camera, please read this
manual carefully. Be sure to keep it handy for later reference.
Über diese Bedienungsanleitung
Lesen Sie bitte vor der Montage und dem
Inbetriebnehmen der Kamera zuerst diese
Bedienungsanleitung sorgfältig durch und bewahren Sie
sie zum späteren Nachschlagen auf.
À propos de ce manuel
Avant d'installer et d'utiliser la caméra, veuillez lire ce
manuel attentivement. Gardez-le à portée de main
pour toute référence ultérieure.
VCB-9312P

Advertisement

loading

Summary of Contents for Sanyo VCB-9312P

  • Page 1 VCB-9312P INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MANUEL D’INSTRUCTIONS B/W CCD Camera CCD-Schwarzweißkamera Caméra CCD Noir et Blanc About this manual À propos de ce manuel Before installing and using the camera, please read this Avant d’installer et d’utiliser la caméra, veuillez lire ce manual carefully.
  • Page 2: Table Of Contents

    CONTENTS FEATURES • Built-in interline transfer method 1/3" CCD, approx. 320,000 PRECAUTIONS..................2 picture elements PARTS NAMES AND FUNCTIONS ............3 • Low smear, anti-blooming, low lag, no burning and no geometric CONNECTIONS AND INSTALLATION ........... 5 distortion using the CCD solid state image device •...
  • Page 3: Precautions

    Disconnect the power greasy smoke or steam, where the dampness may get too high, or cord immediately, and consult your dealer (or a Sanyo Authorized where there is a lot of dust.
  • Page 4: Parts Names And Functions

    PARTS NAMES AND FUNCTIONS The view angle of this camera is as follows: Horizontal: 71˚ Vertical: 53˚ Diagonal: 90˚ To adjust the camera angle, use the camera mounting bracket (sold separately). English...
  • Page 5 PARTS NAMES AND FUNCTIONS 1 Hood lens 6 Camera mounting screw hole (1/4"–20 UNC) 2 Focus ring When mounting the camera to the mounting bracket, use this installation hole. The focus does not need adjustment for subjects 1 m and more 7 Lens cover fixing screw from the lens.
  • Page 6: Connections And Installation

    CONNECTIONS AND INSTALLATION Connecting the coaxial cable horizontally Cut and prepare the extremity of the coaxial cable (sold separately), as illustrated. Attach the coaxial cable to the base. Loosen the VIDEO OUT terminal screw (A) and the GND terminal screw (B), then insert the center wire of the coaxial cable in the VIDEO OUT terminal and make sure the shielding mesh part of the cable is located into the GND cable clamper, then tighten both screws (A and B) to attach the cable.
  • Page 7 CONNECTIONS AND INSTALLATION Installing the BNC plug (sold separately) To connect the camera to peripheral devices, use a coaxial cable with BNC plug. Cut the extremity of the coaxial cable (sold separately), as illustrated. • Cable type RG-6U (5C-2V), 500 m maximum. 7mm 8mm If the type of peripheral devices connected, the type of cable used and/or the cable length are not as specified, the image and synchronization signals may not be...
  • Page 8 CONNECTIONS AND INSTALLATION Basic connections for monitoring or recording The peripheral devices (VCR, monitor, etc.) and cables are sold separately. (Example of connection to a monitor) Make the video signal connection between the camera and the monitor or time lapse VCR. Plug the AC adaptor to a wall outlet.
  • Page 9: Settings And Adjustments

    SETTINGS AND ADJUSTMENTS Adjusting the focus Loosen the lens cover fixing screw (A). Turn the cover counterclockwise to align the tab (C) on the lens cover with the tab (B) on the base and remove the cover. Remove the hood lens (D), then while watching the image on the monitor turn the focus ring (E) to adjust the focus.
  • Page 10: Troubleshooting

    Camera sure that the camera is used correctly. If it still does not perform TV system CCIR standard (625 TV lines, 25 correctly, please consult your dealer or a Sanyo Authorized Service frames/sec.) Center. Scanning system 625 TV lines, 50 field/sec.,...
  • Page 11 SPECIFICATIONS Temperature: –10˚C ∼ +50˚C DIMENSIONS Operational environmental conditions Humidity: less than 90% RH (Camera) Temperature: –20˚C ∼ +60˚C Storage environmental 51 mm conditions Humidity: less than 70% RH Power supply 12 V DC (supplied from AC adaptor) Power consumption 12 V DC/150 mA Weight Approx.