Es 340 Control; Es 510 Control - Electrolux 30” GAS FREESTANDING RANGES Service Update Manual

ES 340 Control Features:
• Automatic oven (Delay, Cook, and Off)
• Full slew up / down control
• Digital Time and Temperature Display
• Electronic Clock and Countdown Timer (12 Hour)
• Dual Radiant™ Baking (electric models)
• Variable broil (2 positions)
• 2 Pre - programmed clean cycles
(2 hour Speed clean - 3 hour Clean )
• 12 hour energy saving shut-off with override for
continuous operation
• Selectable Fº or Cº temperature readout
• Control Lockout (disables oven and locks door)
• Oven Light Switch on control.
• User Adjustable Oven Temperature Offset
ES 510 Control Features:
• Convection Bake and Convection Roast settings
• Automatic Convection Conversion feature
• Sabbath Mode (Star-K Certified)
• Keep Warm Feature - Maintains 170°F oven
temperature for up to 3 hours.
• Favorite Setting - User can program and store up
to 3 different bake or timed bake cycles
• Automatic oven (Delay, Cook, and Off)
• Numeric Keypad Temperature Selection
• Digital Time and Temperature Display
• Electronic Clock and Countdown Timer (12 Hour)
• Dual Radiant™ Baking (electric models)
• Variable broil - Temperature adjustable between
400°F & 550°F
• 3 Pre - programmed clean cycles
(2 hour Speed clean - 3 hour Clean - 4 hour
Maxx clean)
• 12 hour energy saving shut-off with override for
continuous operation
• Selectable Fº or Cº temperature readout
• Control Lockout (disables oven and locks door)
• Oven Light Switch on control.
• User Adjustable Oven Temperature Offset
A sales demo (SD) mode is available in the ES510 control that allows the control panel functions to
be demonstrated without turning on any burners or elements. To enter or exit the SD mode disconnect
power to the range. Reconnect the power and within 45 seconds touch the
and hold until "sd" appears in the EOC display (approximately 6 seconds). The ESEC display windows
will also display "sd" momentarily and then go blank. The time of day display will blink until the clock is
set. In the Sales Demo mode all control panel and display functions can be demonstrated but the ele-
ments will not heat.
To exit the Sales Demo mode you must repeat the procedure used to enter the Sales Demo mode.
Disconnect the power to the range; reconnect the power and within 45 seconds touch and hold the
pad until the "sd" display disappears. You can not exit the Sales Demo mode by pressing the
Bake
time
Stop/Clear keypad or by resetting the power to the range.

ES 340 CONTROL

ES 510 CONTROL

Sales Demo Mode
Page 40
keypad on the EOC
Bake
time
P/N 316439221