Dynamicroutingrule - D-Link NetDefend DFL-210 Cli Reference Manual

3.17. DynamicRoutingRule

3.17. DynamicRoutingRule
Description
A Dynamic Routing Policy rule creates a filter to catch statically configured or OSPF learned routes.
The matched routes can be controlled by the action rules to be either exported to OSPF processes or
to be added to one or more routing tables.
Properties
Index
Name
From
OSPFProcess
RoutingTable
DestinationInterface
DestinationNetworkExactly
DestinationNetworkIn
NextHop
MetricRange
RouterID
OSPFRouteType
OSPFTagRange
LogEnabled
LogSeverity
Comments
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
The index of the object, starting at 1. (Identifier)
Specifies a symbolic name for the rule. (Optional)
OSPF or Routing table. (Default: OSPF)
Specifies from which OSPF process the route should be im-
ported from into either a routing table or another OSPF pro-
cess.
Specifies from which routing table a route should be imported
into the OSPF AS or copied into another routing table.
The interface that the policy has to match. (Optional)
Specifies if the route needs to match a specific network ex-
actly. (Optional)
Specifies if the route just needs to be within a specific net-
work. (Optional)
The next hop (router) on the route that this policy has to
match. (Optional)
Specifies an interval that the metric of the routes needs to be
within. (Optional)
Specifies if the policy should filter on router ID. (Optional)
Specifies if the policy should filter on OSPF router type.
(Optional)
Specifies an interval that the tag of the routers need to be
within. (Optional)
Enable logging. (Default: No)
Specifies with what severity log events will be sent to the spe-
cified log receivers. (Default: Default)
Text describing the current object. (Optional)
105
Chapter 3. Configuration Reference