Cleaning the cyclonic filters
(fig. I & J)
•
Remove and empty the dust bowl.
•
Twist the dust bowl end cap (19) anti
clockwise.
•
Lift off the dust bowl end cap.
•
Lift out the cyclonic filter (20).
•
Remove the inlet filter (21) from the cyclonic
filter (20).
•
Remove the foam insert (22) from the inlet
filter (21).
•
Brush all parts with with a soft brush or wipe
with a damp cloth.
Warning! Ensure all parts are completely dry
before reassembly.
•
Insert the foam insert (22) into the inlet filter
(21).
•
Insert the inlet filter (21) into the cyclonic filter
(20).
•
Insert the cyclonic filter (20) into the dust
bowl (1).
•
Place the dust bowl end cap (19) onto the
dust bowl and twist it clock wise to lock into
place.
•
Refit the dustbowl to the appliance.
Cleaning the exhaust filter
(fig. K)
•
Twist the exhaust filter cover (23)
anti-clockwise then pull off.
•
Remove the Exhaust filter (24).
•
Brush all parts with with a soft brush.
Warning! Ensure all parts are completely dry
before reassembly.
•
Refit the exhaust filter (24).
•
Re-fit the exhaust filter cover (23) and twist it
clockwise to lock it into place.
Clearing a blockage
If the appliance becomes blocked.
•
Switch off and unplug the appliance.
•
Place the appliance on its side.
•
Twist the inspection cover anti-clock wise
and remove it from the bottom of the
appliance.
•
Carefully clear the blockage.
•
Re-fit the inspection cover and twist it
clockwise to lock it into place.
Mains plug replacement
If a new mains plug needs to be fitted:
•
Safely dispose of the old plug.
•
Connect the brown lead to the live terminal in
the new plug.
•
Connect the blue lead to the neutral terminal.
Warning! Follow the fitting instructions supplied
with good quality plugs. Recommended fuse:
13A.
Technical Data
Voltage
Vac
Power (Nominal) W
Power (Max)
W
Weight
kg
ENGLISH
VM2825 (Type 02)
220 - 240 50/60Hz
1800
2000
5.5
9