Battery Installation - Makita LXRM03 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

iPhone, iPod, iPod classic, iPod shuffle, and iPod touch
are trademarks of Apple Inc., registered in the U.S. and
other countries.
"Made for iPod" and "Made for iPhone" mean that an
electronic accessory has been designed to connect
specifically to iPod or iPhone, respectively, and has been
certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory
standards. Please note that the use of this accessory with
iPod or iPhone may affect wireless performance.
The following tables indicate the operating time on a single charge in Radio mode/iPod iPhone mode.
7.2 V
9.6 V
BL7010
PA09
9050
9100
9120
9100A
9102
9122
9102A
BH9020
BH9020A
9134
9135
BH9033
BH9033A
Note: Table regarding to the battery operating time above is for reference. The actual operating time may differ with the
type of the battery and the model of iPod/iPhone in use.
: Cluster Battery
: Slide Battery
WARNING:
Do not use two main batteries at the same time.
6
Battery Cartridge Voltage
10.8 V
12 V
PA12
1250
1200
BL1013
1220
1200A
1202
1222
1202A
BH1220
BH1200C
1234
1235
1235F
BH1233
BH1233C

Battery Installation

Note:
Keeping back up batteries inside the compartment
prevent stored data in preset memories from being lost.
1. Pull out the battery compartment locker to release
battery compartment. There are main battery pack
compartment and back up battery compartment.
(Fig. 2 & 3)
2. Remove back up battery compartment cover and
insert 2 fresh UM-3 (AA sizes). Make sure the
batteries are with correct polarity as shown inside the
compartment. Replace the battery cover.
3. After back up batteries are inserted, insert the main
battery pack to power radio. The suitable battery
packs for this radio listed as the following table.
14.4 V
18 V
PA14
PA18
1450
1850
1420
BL1815
BL1415
1422
1822
BH1420
1434
1834
BH1427
1435
1835
1435F
BL1830
BL1430
BH1433
3-1. Installing or removing Slide battery cartridge (Fig. 4)
• To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Always insert it all the way until it locks in
place with a little click.
AT SPEAKER OUTPUT =
50 mW + 50 mW
unit: Hour
In Radio or
In iPod
AUX
mode
APPROX.
APPROX.
5.5
4.0
APPROX.
APPROX.
7.0
6.0
APPROX.
APPROX.
11.0
10.0
APPROX.
APPROX.
14.0
13.0
APPROX.
APPROX.
15.0
13.5
APPROX.
APPROX.
16.5
15.0
APPROX.
APPROX.
18.0
16.5
In iPhone
mode
APPROX.
2.0
APPROX.
3.0
APPROX.
6.0
APPROX.
9.0
APPROX.
10.0
APPROX.
11.0
APPROX.
12.0

Advertisement

Table of Contents
loading

Table of Contents