Header; Error Code - JVC PK-VS4GD3G Instructions Manual

Header

Indicates the beginning and type of communication data.
Computer N PK-VS4GD3G (Graphics Interface)
Character Hex
'!' 21
'?' 3F
PK-VS4GD3G (Graphics Interface) N Computer
Character Hex
'@' 40
ID
The following numeric characters are used to identify PK-VS4GD3G (Graphics Interface) when two or more PK-VS4GD3G units
are connected to a single computer.
Setting separate identification numbers for each PK-VS4GD3G allows independent control of each PK-VS4GD3G unit.
Assignable ID numbers
ID Character (Hex)
0 '0' (30H)
1 '1' (31H)
2 '2' (32H)
3 '3' (33H)
4 '4' (34H)
5 '5' (35H)
6 '6' (36H)
7 '7' (37H)
(*) Factory default ID setting is '1' (31H).
ID number '0' (30H) should be used when assigning all connected PK-VS4GD3G units for batch operations. This means that
when assigning independent ID numbers to multiple units, 15 of the 16 assignable numbers (from '1' through 'F') can actually be
used for registration.
Please note that tally (response) data is not returned from the PK-VS4GD3G when the global ID assignment function (0) is used.
CR
Indicates the end of each of data. (0DH)

Error Code

Error code HEX
'A00' 41 30 30
'A01' 41 30 31
'A02' 41 30 32
'A03' 41 30 33
'A04' 41 30 34
'A05' 41 30 35
'A06' 41 30 36
18
Command to the PK-VS4GD3G (Graphics Interface)
Query (request for information) to PK-VS4GD3G (Graphics Interface)
Tally (Response) data
ID Character (Hex)
8
9
10 'A' (41H) or 'a' (61H)
11 'B' (42H) or 'b' (62H)
12 'C' (43H) or 'c' (63H)
13 'D' (44H) or 'd' (64H)
14 'E' (45H) or 'e' (65H)
15 'F' (46H) or ' f ' (66H)
The command is not supported.
The parameter is invalid, or connection is time out.
The parameter is out of range.
Other errors
Invalid command at the current mode or setting.
The command is invalid when no signal.
The command is under process.
Definition
Definition
'8' (38H)
'9' (39H)
Meaning