Blind Hemming - Kenmore 1357 Instructions Manual

BLIND HEMMING'
SETTINGS
i
Special Stitch Dial- "_
Stitch Width Control - 2 to 3
Stitch Length Control - 12 to 8
Special Stitch Modifier- Red Dot
Zigzag foot or edgestitcher if available
Zigzag Needle Plate
Inside of
.:. :.!
Finished Edge
,
Finish edge of hem anyway you
desire, Turn up hem appropriate
width. (Fig. 1)
2. Fold garment away from hem
leaving 1/8" of hem edge extending.
(Fig. 2)
Right Side of
Finished Hem
.
.
Place garment under presser foot in
such a manner that straight stitches
will be sewn on extended edge.
The zigzag stitch should just catch
the fold of the garment. (Fig. 3)
Press both sides of the finished hem.
The right side of the garment will
show only the blind stitches. (Fig. 4)
36
Fig. 4