Pioneer DDJ-WeGO3 Operation Manual page 6

4. EQ LOW: Adjusts the low (bass) frequencies of the left or right deck.
5. EQ MID: Adjusts the middle (mid) frequencies of the left or right deck.
6. EQ HI: Adjusts the high (treble) frequencies of the left or right deck.
7. LOAD: Load the selected track from BROWSER to the left or right VirtualDJ deck.
8. BROWSE Knob/push:
Use this knob to scroll through files. Push the knob to toggle between the normal
Decks view and the Browser Zoom panel of the VirtualDJ WeGO3 GUI.
Note: The Browser Zoom panel is not available in the default GUI of VirtualDJ, therefore the
push action will have no affect if this skin is selected)
Hold SHIFT down and then use this knob to scroll through the folders. While
SHIFT is pressed, push the knob to open/close sub-folders.
9. HEADPHONES VOLUME: Controls the level of the Headphones Output Channel.
The knob is not controlling the Headphones Output level of the software mixer
(Hardware operation), therefore it will not move the corresponding knob in the
VirtualDJ GUI.
10. MIC VOLUME. Controls the level of the
Microphone Input. The Microphone Input is not
handled by the
Operation), therefore
Operation is available via the VirtualDJ GUI.
11. MASTER VOLUME: Adjust the level of the
Master Output. The knob is not controlling the
Master Output level of the software (hardware
operation), therefore it will not move the
corresponding knob in the VirtualDJ GUI.
12. ON/STANDBY. Press this button to turn the
WeGO3 on (green led), and use the same
button to set the unit in Stand By (red led)
VirtualDJ 8 – Pioneer DDJ-WeGO3
software (Hardware
no Microphone
Mic Volume – Left side
Master Volume – Right side
6