Aquos Link Connection; Connecting An Aquos Bd Player Via The Aquos Link-Compatible Audio System; Connecting An Aquos Bd Player Only; Regarding "Select Recording Device - Sharp LC-46LX650H Operation Manual

AQUOS LINK

AQUOS LINK connection

First connect the AQUOS LINK-compatible audio system
or an AQUOS BD player that supports the HDMI CEC
protocol.
NOTE
• Refer to the operation manual of the device to be
connected for further details.
• After unplugging connection cables or changing the
connection pattern, first turn on the power of the TV with
all relevant device's power turned on. Change the external
input source by pressing TV/VIDEO, select the appropriate
input source and verify the audio visual output.
• The cables illustrated in the following explanation are
commercially available items.
Connecting an AQUOS BD player via the
AQUOS LINK-compatible audio system
AQUOS LINK-compatible
Optical fibre cable
(commercially available)

Connecting an AQUOS BD player only

HDMI-certified
cable (commercially
available)

Regarding "Select recording device"

Select the device for recording from connected devices.
NOTE
• This function enables you to select either the USB storage
device for USB recording use or the HDMI device with CEC
protocol.
Go to "Menu" s "Setup" s "View setting" s
1
"Select recording device".
Select the device for recording using the
2
REC E on the remote control unit.
• Select "USB storage" when using the
USB recording.
• Select "HDMI device" when using the
recording to the HDMI device.
Press RETURN to end the operation.
3
HDMI-certified
cable (commercially
available)
audio system
AQUOS BD player
AQUOS BD player
REC E
REC E

AQUOS LINK setup

AQUOS LINK control

Press MENU and the MENU screen displays.
1
Press c / d to select "Link operation".
2
Press a / b to select "AQUOS LINK setup"
3
and then press ENTER.
Press a / b to select "AQUOS LINK control".
4
Press c / d to select "On".
5

AQUOS LINK auto power on

If this is activated, the One Touch Play function is enabled.
While the TV is in standby mode, it automatically turns on
and plays back the image from the HDMI source.
Press MENU and the MENU screen displays.
1
Press c / d to select "Link operation".
2
Press a / b to select "AQUOS LINK setup",
3
and then press ENTER.
Press a / b to select "Auto power on".
4
Press c / d to select "On".
5
Press MENU to exit.
6
NOTE
• The factory default for this item is "Off".
for
for
Link operation
AQUOS LINK setup
AQUOS LINK control
[On]
Auto power on
On Off
Setting auto power on by AQUOS
Selecting recorder
LINK
Selecting channel key
Using genre info
Audio return channel
[Auto]
65