Table of Contents
Advertisement
3. Instructions for use
Unauthorised modification to the machine can be dangerous and lead to severe injury
during use. Cobra Garden disclaims any liability in case of misuse or failure to comply
with the instructions and / or regulations in place.
3.1 Cleaning, storage, transportation and Maintenance
Before any work on the electric pole saw, disconnect the plug from the outlet.
3.1.1 Cleaning the pole saw
Regular cleaning after use will ensure better functioning of the electric pole saw and
reduce the risk of corrosion or rust.
CAUTION: Never immerse the electric pole saw in water or any other liquid for cleaning.
Never clean the appliance with high pressure water.
After stopping the device and allowing it to cool, remove the cutting debris accumulated
under the cover by blowing with compressed air or cleaning with a brush. If necessary,
wipe it with a soft damp cloth.
3.1.2 Storage and transport of the saw
Store your pole saw in a dry, temperate and dark place. Store in a place out of
•
reach of children.
•
For long term storage, drain the oil tank and grease the chain and chain guide
beforehand.
Only carry the pole saw when it is unplugged and completely stopped. Hold
•
the unit by the front handle, with the guide turned back and the protective scabbard in
place
3.1.3 Maintenance of the pole saw
Lubricating the chain
• This saw is equipped with an automatic chain lubrication system. Regularly check the
oil level.
To initiate the supply of oil on the chain, run the saw near the ground on full revs and
•
look for a stream of oil on the bar and chain or the ground below.
Sharpening the chain
• For best results, sharpen the chain regularly, if at least once a year by a specialist
workshop.
Note: A low oil level or a cutting with a dull chain can reduce cutting
performance quickly.
10 / Instruction Manual
Advertisement
Table of Contents
