Zanussi ZHT610X UK User Manual page 14

Hide thumbs Also See for ZHT610X UK:
Table of Contents

Advertisement

Wall Cabinet Fitting
Before fitting the cooker hood beneath any type of wall
cabinet ensure it is firmly fixed to the wall in accordance
with the manufacturers instructions.
1.
Use the paper template provided to mark the hole
positions on the underside of the cabinet. Ensure the
front edges of the template are aligned with the front
edge of the cabinet carcase.
2.
Check the distances are correct with a tape measure
as stated on the template. The four holes are 5mm
(1/4") diameter.
3.
If the ducting spigot is being used, cut a circular hole,
using a pad saw or similar cutter.
Fitting the Cooker Hood to the Wall
1.
Lift the hood squarely to the wall slightly higher than
the screws (not supplied).
2.
Lower the cooker hood until the cooker hood locates
onto the two screws.
3.
Ensure that the cooker hood is correctly located
before letting go.
To Level the Cooker Hood
1.
Remove the lower grille by pressing inwardly on the
two slide catches located towards either side of the
grille towards the front. The grille will open from the
front.
2.
Slide the right edge of the grille forward until it clears
the guide and then unhook the left hinge pin.
3.
Support the grille when removing it from the guides
carefully.
4.
The two levelling screws will be visible towards either
end of the back panel.
5.
Turn the screws clockwise to lift the front edge of
the hood and use a spirit level to check the hood is
positioned at right angles to the wall before fitting the
security system.
6.
The wall brackets have two studs and when the coo-
ker hood is hung onto the brackets the studs project
trought the holes above the levelling screws.
7.
When the hood is level fit the two shake proof wa-
shers and nuts supplied to fully secure the cooker
hood.
The symbol
indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly,
you will help prevent potential negative consequences
for the environment and human health, which could
otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling
of this product, please contact your local city office, your
household waste disposal service or the shop where you
purchased the product.
14
on the product or on its packaging

Advertisement

Table of Contents
loading

Table of Contents