Important Safeguards For All Electrical Appliances; Save These Instructions - Breville the Crisp Control BWM250 Instruction Booklet

BREVILLE RECOMMENDS SAFETY FIRST
IMPORTANT SAFEguARDS FOR
ALL ELECTRICAL APPLIANCES
• Unwind the power cord fully before use.
• Do not let the power cord hang over
the edge of a bench or table, touch hot
surfaces or become knotted.
• Connect only to a 230V or 240V
power outlet.
• To protect against electric shock, do not
immerse the power cord, power plug or
appliance in water or any other liquid.
• Always turn the power off at the power
outlet, remove the plug and allow all parts
to cool before attempting to move the
appliance, when the appliance is not in use,
before cleaning and when storing.
• The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance, by a person responsible for
their safety.
• Children should be supervised to ensure
that they do not play with the appliance.

SAVE THESE INSTRuCTIONS

4
• It is recommended to regularly inspect
the appliance. Do not use the appliance if
the power cord, power plug or appliance
becomes damaged in any way. Return the
entire appliance to the nearest authorised
Breville Service Centre for examination
and/or repair.
• Any maintenance, other than cleaning,
should be performed at an authorised
Breville Service Centre.
• This appliance is for household use only.
Do not use this appliance for other than
its intended use. Do not use in moving
vehicles or boats. Do not use outdoors.
Misuse may cause injury.
• The appliance is not intended to be
operated by means of an external timer or
separate remote control system.
• The installation of a residual current
device (safety switch) is recommended to
provide additional safety protection when
using electrical appliances. It is advisable
that a safety switch with a rated residual
operating current not exceeding 30mA be
installed in the electrical circuit supplying
the appliance. See your electrician for
professional advice.