Operation - Honeywell HHT-013-HD User Manual

HHT-013-HD_OM 020810.qxd

OPERATION

• Ensure the air purifier is plugged into a working electrical outlet and the Power Knob and Ionizer Knob
are OFF (pointed to location marked (O).
• Turn the Power Knob to the High (III) position for several minutes and then rotate the Power Knob to the
desired cleaning level ( I = Low, II = Medium, III = High).
It is recommended you run your air purifier 24 hours a day to ensure continuous cleaning.
Portable air purifiers are more effective in rooms where all doors and windows are closed.
IONIZER FEATURE
The Ionizer helps boost the performance of the
air purifier.
• Turn the Ionizer Control Knob to the ON ( I ) (see
Fig. 3) position. This will power the Ionizer on. To
turn the Ionizer feature off, simply turn the knob
to the OFF (O) position.
NOTE: If you have asthma symptoms or other
breathing disorders that can be triggered by the
presence of an ionizer, we recommend that you
do not activate the ionization feature.
NIGHTLIGHT FEATURE
The nightlight provides soft illumination.
• To turn the night light on, press the nightlight button (see Fig. 3).
• To turn it off, press the nightlight button again.
ELECTRONIC FILTER CLEAN REMINDER
This model air purifier has an electronic filter check
to remind you when to replace the HEPA-Type filter
based on the air purifier's hours of use.
A red LED light will illuminate when it is time to
check the filter.
You should periodically check the filter. Depending
on operating conditions, the Filter should be
replaced every 6 months for best performance.
REPLACE WITH HEPA-TYPE FILTER P
TO RESET THE ELECTRONIC FILTER CHECK:
When the filter monitor light remains on, it is time to check the HEPA-Type filter and reset the filter
monitor, if needed. With the unit powered on, insert the tip of a ball-point pen or paperclip next to the LED
filter check light and hold for approximately 5 seconds until the light turns off (see Fig. 4). Depending upon
your individual usage (environment and hours used), you may need to replace the filter more or less
frequently. Each time you replace your filter, you should re-set the filter monitor reset button.
2/8/10 2:54 PM Page 3
Fig. 3
Fig. 4
Nightlight
Button
Power/Speed
Knob
Ionizer Control
Knob
Filter Monitor
Reset Light