Server Overview; Figure 1-1. Hp Integrity Rx2620 Server (Front View); Figure 1-2. Hp Integrity Rx2620 Server (Front View With Bezel Removed); Figure 1-3. Hp Integrity Rx2620 Server (Rear View) - HP Integrity rx2620 User's & Service Manual

Introduction

Server Overview

Server Overview
The HP Integrity rx2620 server chassis is a 2U Electronics Industry Association (EIA) enclosure, which
mounts in any standard 19 inch EIA rack. All external cabling connects from the rear of the enclosure. With
the server installed in the rack, service access is enhanced by the use of chassis slides. It has bays to
accommodate 1 + 1 redundant, hot-swappable power supplies, accessible from the front of the product. There
are three low-profile hot swappable hard disk drives accessible from the front, and a slim-line optical drive for
a CD-R, CD-RW, DVD-R or DVD+RW. There are N + 1 redundant, hot-swappable server fans, all clearly
identified and easily accessible. Server status indication, a power switch, server locator switch and LED are
located in the front within the bezel. There is also a server locator switch and LED in the back of the server
for easy identification in the rack. See Figure 1-1, Figure 1-2, and Figure 1-3 for front and back views of the
server.
Figure 1-1 HP Integrity rx2620 Server (front view)
Figure 1-2 HP Integrity rx2620 Server (front view with bezel removed)
Figure 1-3 HP Integrity rx2620 Server (rear view)
WARNING Unplug all power cords from system before servicing
PWR
2
LAN 10/100
Automatic Internal SCSI Termination
SCSI LVD/SE
18
PWR
1
Management Card
VGA CONSOLE / REMOTE / UPS
MP
RESET
TOC
LAN Gb A LAN Gb B
CONSOLE
SERIAL A
SERIAL B
USB
Chapter 1