Table of Contents
Advertisement
I]]
HOME (MENU) Press to display menus of selected external equipment.
Press to tum the external equipment on and off after
selecting an input using the input select buttons
[gJ.
Press one of the input select buttons to select and control
equipment connected to the corresponding input. The
input select button indicator lights up momentarily when
pressed to show which external equipment the remote
control is operating. See the Startup Guide for
programming the remote control.
•
I~/~I:
Goes to the beginning of the previous/next
title/chapterlscene/track.
• ... /... : Replays the scene/briefly fast forwards the
scene.
•
~/~:
Fast reverses/fast forwards the disc when
pressed during playback.
•
~:
Plays a disc at normal speed.
• II: Pauses the playback.
• .: Stops the playback.
Press to display the Digital Electronic Program Guide
(EPG) when the satellite receiver or cable box is
selected.
For a set-top box, use with 0-9 and ENT to select digital
channels. For example, to enter 2.1, press
®' 0, CD,
and ENT.
For Blu-ray Disc or DVD, etc., use with 0-9.
For a set-top box, press 0-9 to select a channel. Press
ENT to change channels immediately.
For Blu-ray Disc or DVD, etc., press 0-9 as number key
entry. Press ENT to confirm.
REC . : Press to record. Pressing this button alone starts
the recording process.
REC PAUSE II: Press to pause the recording.
REC STOP .: Press to stop the recording.
Press to display the top menu of the BDIDVD disc.
Press to display the BDIDVD disc menu.
Press to switch to another wireless channel if the LINK
LEVEL is low or the picture is noisy or the sound quality
is diminished.
[I]
AV POWER
@]
IN
1/213/4
HDMI, IN
5
COMPONENT
operating
buttons
[gJ
IN
1/213/4
HDMI, IN 5
COMPONENT
input select
buttons
[ID
GUIDE
[l]
RETURN
Press to go back to the previous screen or exit from the
screen when displaying menu items and settings.
[j]]
DVRlVCR
record
buttons
[ID
0-9, ENT
[j]O
Ml
CONNECT
IHI
BD/DVD TOP
MENU! BDI
DVD MENU
When using the remote control to operate the transmitter unit and connected external equipment, the
following button operations are available.
p,
• You must setup the IR
Blaster
before you can use external equipment (see
page 13).
• Button functionality may differ depending on your equipment.
If some functions do not work, then use the remote control supplied with your
equipment.
(continued)
11
Advertisement
Table of Contents
