Section Name And Functions; Camera Mounting; Lens - Hitachi KP-FD500GV Operation Manual

Section name and functions

Camera / Tripod adaptor
mounting screw holes
Lens mount
（C mount）
Camera / Tripod adaptor
mounting screw holes

Camera mounting

Attached optional accessory the tripod adaptor "TA-M1", mount the camera to a tripod or mounting bracket.

Lens

CAUTION
Observe the dimensions of the lens mounting selection as
illustrated at the right.
If the dimensions are not observed, do not use such a lens,
because the lens and the camera will be damaged.
Screw type: Ｕ1/4-20
Length Ｌ = 4 to 5.5mm
L
Screws longer than 5.5 mm can cause internal damage, while less
than 4 mm prevents secure fastening and risks dropping to cause
damage and injury.
Ethernet connector
Use for digital video output and
camera control signal input/
output signal.
DC IN/SYNC connector
Use for DC+12V power or external
trigger /VD signal input.
Lens optics
Lens flange
Max 6.5mm
2