Recording
DIS
Sets whether to reduce camera shake.
"Reducing Camera Shake" (A P.25)
Recording
Functions as the START/STOP button.
"RECORD BUTTON" (A P.96)
Start/Stop
Quick Re-
Enables the most recently captured video to be
view
viewed.
"Checking the Captured Image Immediately" (A
P.25)
Auto/Manual
Switches the recording mode between Auto and Man-
ual.
NOTE:
The slider operation button cannot be used when the LCD monitor is
●
flipped.
The zoom appears when the slider is touched.
●
Useful Settings for Recording
The aspect ratio for recording can be switched between 16:9 and 4:3.
●
"SELECT ASPECT RATIO" (A P.79)
Videos can be found easily during playback by categorizing them when
●
recording.
"Registering Files to Events Before Recording" (A P.34)
When "QUICK RESTART" is set to "ON", this unit turns on immediately
●
if you open the LCD monitor within 5 minutes after the power is turned
off by closing the monitor.
"QUICK RESTART" (A P.97)
When "AUTO POWER OFF" is set to "ON", this unit turns itself off au-
●
tomatically to conserve power when it is not operated for 5 minutes.
(only when using the battery pack)
"AUTO POWER OFF" (A P.95)
CAUTION:
Do not expose the lens to direct sunlight.
●
Do not use this unit in the rain, snow, or places with high humidity like
●
the bathroom.
Do not use this unit in places subject to excessive humidity or dust, as
●
well as places exposed to steam or smoke directly.
The access lamp lights up when video recording is in progress. Do not
●
remove the battery pack, AC adapter, or SD card when the lamp is
lighted.
Make a backup of important recorded data
●
It is recommended to copy your important recorded data to a DVD or
other recording media for storage. JVC will not be responsible for any
lost data.
NOTE:
Before recording an important scene, it is recommended to conduct a
●
trial recording.
Check the remaining recording time in the media before you start
●
shooting. If there is not enough space, move (copy) the data to a PC or
disc.
Do not forget to make copies after recording!
●
Recording stops automatically as it cannot be performed for 12 or more
●
consecutive hours according to specifications.
(It may take some time to resume recording.)
For long recordings, the file is split into two or more files if the size ex-
●
ceeds 4 GB.
You can connect this unit to the AC adapter to record for long hours in-
●
doors.
24
Zooming
The angle of view can be adjusted using zoom.
Use the W end (wide angle end) to shoot a wider field of view.
●
Use the T end (telephoto end) to magnify the subject for shooting.
●
.
You can also use the slider's T/W zoom to zoom.
●
.
NOTE:
You can expand the zoom area without degrading the image quality by
●
using dynamic zoom.
When digital zoom is used, the image becomes grainy as it is digitally
●
enlarged.
The zoom ratio range can be changed.
●
"ZOOM" (A P.78)
Capturing Still Images During Video Recording
Still images can be captured by pressing the SNAPSHOT button while in
the video mode (standby or recording).
.
"PHOTO" lights up on the screen when a still image is being captured.
●
.
The still images captured during video recording are saved to the desti-
●
nation set in media settings.
"REC MEDIA FOR IMAGE (GZ-MS250/GZ-MS230)" (A P.100)
"IMAGE SLOT SELECTION (GZ-MS215/GZ-MS210)" (A P.100)
NOTE:
The size of the still images captured in the video mode varies with the
●
"SELECT ASPECT RATIO" setting.
"16:9" : 640×360
"4:3" : 640×480
"SELECT ASPECT RATIO" (A P.79)
The picture quality varies with the "IMAGE QUALITY" setting.
●
"Changing Still Image Picture Quality" (A P.83)
When an effect (black and white/sepia) is applied to the video, the
●
same effect will be applied to the still image.
"EFFECT (GZ-MS250/GZ-MS230)" (A P.85)