Chase Playback - Pioneer DVR-RT502 Operating Instructions Manual

Recording

Chase Playback

RAM
You can begin playback from the beginning of a
program currently being recorded. You will find this
function of great advantage on long programs, as
you do not have to wait for the end of recording to
begin playback.
Note
• Chase playback is not available when recording a
DVD-RW/R disc and video tape.
• Chase playback is not available when recording in
XP mode.
• Slow, Commercial skip, One touch replay, A-B
repeat, and Frame advance will not work during
chase playback.
• Chase playback does not work until 30 seconds of
recording have elapsed.
• If you press DISPLAY during chase playback, the
information screen is displayed (see page 35).
• Chase playback will stop when the recording ends.
• Chase playback will only function when a program
is being recorded.
1 While recording a TV program onto the DVD-
RAM disc, press PLAY to start chase playback.
The TV program as it is being recorded will played back.
2 Locate a scene you want through the following
operations if necessary.
Still playback:
Press PAUSE/STILL.
• To resume chase playback, press PLAY.
Fast forward/Review playback:
Press SEARCH / . Every press SEARCH, it
switches the speed of the search.
• To resume chase playback, press PLAY.
• If the playback position catches up to within about
60 seconds, chase playback resumes. It may differ
depending on the recording condition and search
speed.
Locating a chapter:
Press SKIP / to locate a chapter that you want to
watch.
• If you press SKIP (
newest chapter, it starts playing back from about 15
seconds before the recording position.
Locating a specific scene:
Press PLAY MODE enables you to do a Time Search or
a Chapter Search. (See page 37.)
3 Press STOP to end chase playback. If you press
STOP again, the recording stops.
) while playing back the
06
63
En