Functions In Video Camera Mode - Sharp HSDPA WX-T930 User Manual

Setting a Function for the Send Key
You can set the method to send a taken picture when C
is pressed.
→
"Camera" "Still Camera"
→
"Settings" "Set Send Key"
1.
Select "Short press" or "Long press".
2.
Select "As Message", "Bluetooth", "Via Infrared"
or "IrSS".
Tip
• "Set Send Key" is also available from the following
procedure:
→
"Camera" "Still Camera Settings"
74 Camera
→ →
[Options]
→
"Settings"

Functions in Video Camera Mode

Selecting the Display Size
→
"Camera" "Video Camera"
"Display Size"
1.
Select "Standard" or "Expand".
Selecting the Recording Time and Picture Size
→
"Camera" "Video Camera"
"Record Time/Size"
1.
Select "For Message" or "Extended Video".
"For Message" ( ):
"Extended Video" (
2.
Select the desired picture size.
If "For Message" is selected, select
"QCIF(176×144)" or "SubQCIF(128×96)".
If "Extended Video" is selected, select
"Wide(864×480)", "VGA(640×480)",
"QVGA(320×240)", "HQVGA(240×176)",
"QCIF(176×144)" or "SubQCIF(128×96)".
→ →
[Options]
→ →
[Options]
Limits the size to allow
video to be sent in a
message depending on
service providers.
): Less than 30 minutes
(depending on the
memory).