12: Clock Move - Yamaha SY85 Owner's Manual

12: CLOCK MOVE

Moves all notes and events in the specified track and range of measures forward
or backward by the specified number of "clocks."
This job is not available when the rhythm track (track 9) is selected.
Meas (First & last measure numbers)
Range: 001 ... 999
Controls: [CS6], [CS7], [-1] [+1], Dial
Clock
Range: -999 ... +999
Controls: [CS8], [-1] [+1], Dial
Use the GROUP [A] through [H] keys to select the track on which the
clock move operation is to be performed (A = track1, B = track 2, and so on).
The LED of the selected track will glow red while the LEDs of all other tracks
containing data glow green.
Use [CS6] and [CS7] to specify the first and last measure numbers in the
range of measures over which you want to shift the timing of note and event
data. Use [CS8] to set the number of clocks by which the data will be moved
forward or backward. Minus (-) values move the data backward (toward the
beginning of the song) while plus (+) values move the data forward (toward the
end of the song). Each "clock" is equal to 1/48th of a quarter note.
Press [ENTER/YES] to begin the clock move procedure. The following
confirmation display will appear:
Press [ENTER/YES] again to confirm that you want to go ahead with the
clock move operation, or press [EXIT/NO] to cancel.
When the data has been moved, "Completed!" will appear briefly on the
display.
SONG JOB
SONG EDIT MODE
/
195