Sharp IV-C35M User Manual page 223

Multiple Positional Measurement
SEARCH AREA
Select " SEARCH AREA" and press the SET key to go to the setting screen.
When "RECTANGLE" is selected
Highlight "
The X and Y axes will appear in the search
area. Move the X/Y axes using the up/down/
left/right arrow keys to identify the upper left
corner. When correct, press the SET key.
- To return to the previous coordinates, press
the ESC key.
Next, highlight "
key. Identify the lower right corner the same
way.
DTECT MODE
Select an image processing method for the
edges.
CHNG POINT
DRK BRT
BRT DRK
CENT (BRT)
CENT (DRK)
SEARCH DIRECT
Specify a search direction. The direction for searching varies with each detection shape.
When "RECTANGLE" is selected
Horizontal ( )
Horizontal( )
Vertical ( )
Vertical ( )
When "LINE" is selected
Start point
End point
When "CIRC-L" or "ELIP-L" is selected
Clockwise direction
Counter-clockwise direction Scan around the circumference counter-clockwise
For details, see page 3-25.
UP.L" and press the SET key.
LO.R" and press the SET
See page 3-25.
Scan the reference line from left to right
Scan the reference line from left to right
Scan the reference line from top to bottom
Scan the reference line from bottom to top
End point Scan along a straight line from the starting point to the end point
Start point Scan along a straight line from the end point to the starting point
Scan around the circumference clockwise
RECTANGLE RESET
1
2
3
SET=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
15-8
RETURN RED F
X 224 Y 208
C1 BRT