Stand Setup Method - Hitachi StarBoard FX-DUO-77 User Manual

StarBoard FX-DUO-77

1.4.1 Stand Setup Method

Reconfirm that all the parts are present before assembling and setting up the stand (option).
CAUTION
Tighten the screws securely.
Failure to comply may cause the stand to collapse, resulting in personal injury, or may
cause damage to this product due to shock of impact from the board falling.
[1] Assemble the stand
Assemble the stand according to the following diagram. The numbers in the diagram
correspond to the numbers in the parts list on page 1-3.
(7)
Short
Long
Align both feet with the
longer side facing forward.
(1)
(4)
(9) (5)
(6)
(2)
(9)
Fasten with a
Phillips screwdriver.
(3)
(8)
1-8
Introduction
(7)
Fasten with a
Hexagonal
wrench.
English