Individual Settings; Overview Of Programmes - Siemens WM14P360GB Instruction Manual

Individual settings

Option button Finish in
When you select the programme, the relevant programme duration is displayed. You can
delay the start of the programme before it begins. The Finish in time can be set in increments
of one hour up to a maximum of 24 hours. Press the Finish in button repeatedly until the
required number of hours is displayed (h = hour). Select Start. It is not possible to make
adjustments once the programme has started.
Spin speed (rpm) / (Rinse Stop = no final spin)
You can change the spin speed shown or select
remains in the water after the last rinse, display panel – – –). The maximum selectable spin
speed depends on the model and on which programme is currently selected.
Additional functions
and overview of programmes, page 7
Intensive Wash Extend the washing time for a more intensive washing of heavily
soiled items.
Prewash For heavily soiled items. Prewash at 30 °C.
Less Ironing Special spin sequence with subsequent fluffing. Gentle final spin at
reduced speed. Residual moisture in the laundry is increased slightly.
Extra Rinse Additional rinse cycle. For areas with very soft water or for further
enhancing the washing result.
Start
For starting or interrupting the programme.
(Rinse Stop = no final spin, laundry
5
Individual settings
Audible signal
1. Activate the
mode for
setting the
signal volume
º
Set to
2. Set the volume
for ...
1 step to
the right
* you may need to select the function several times.
1400
1200
800
400
1 step to Press and + 1 step to
the right hold the right
Button signals Information signals
1400 1400
1200
1200
800
800
400 400
Setting the
1 step to Setting the
volume*
volume*
the right
1400
1200
800
400
Release
º
Set to
6