Character Input; Application Software - Panasonic Toughbook CF-71 Series Reference Manual

Dealing With Problems

Character Input

Unable to input anything
but numerals
Only capital letters are
being input
How to input European
characters (ß, à, ç), sym-
bols or Euro Currency
Symbol is unclear
Setup Utility
[Enter Password] is dis-
played
[Advanced] menu can
not be registered
All or some items in [Se-
curity] menu can not be
registered
F9 does not work
[Hard Disk Lock] is not
displayed

Application Software

Computer hangs
Network
Unable to connect to a
network
Sound
The sound is not heard
The computer produces
a strange sound
If NumLk and Key Pad are on, the Numeric Key Pad is ON. To switch it OFF,
press Fn + Key Pad .
If CapsLock is on, the Caps Lock function is ON. To switch it OFF, press
Caps Lock .
Select [Start] - [Programs] - [Accessories] - [System Tools] - [Character Map]. The
Character Map will be displayed. Point to the desired font name and select it.
Enter the User Password or Supervisor Password. If you have forgotten it, contact
Panasonic Technical Support.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
The internal battery maintaining the clock may need to be replaced. Contact Panasonic
Technical Support.
Press Ctrl + Alt + Del
After cutting the power by pressing the sleep switch for more than four seconds,
slide the power switch to power on and open the application again.
If the program no longer works normally, go to [Start] - [Settings] - [Control Panel]
- [Add/Remove Programs] to delete the program. Then, try installing the program
once again.
When using the computer as a network computer, some additional settings may have
to be made depending on the usage conditions. We recommend asking your system
administrator or the person in charge of the network.
Try changing the mute by pressing Fn + F4 .
Has the Setup Utility been used to set [Speaker] to [Disable]?(
If the computer enters the condition the power of the display is OFF (for energy
conservation purposes) or the LCD is closed while the computer is making a sound,
the computer may produce a strange sound, but this does not indicate a problem.
If the computer has not been used for a long period of time, it may produce an
unusual sound at start up. The sound may continue for a short period of time, but
if the computer starts up in a normal manner, then the problem is not serious. If,
however, the computer fails to start up, contact Panasonic Technical Support.
to reboot the computer.
49
page 37)