Table of Contents
Advertisement
Philips Consumer Communications
CUSTOMER SERVICES
Author
: Fabrice Tant
Approval : Jean Pierre Hollande
Operational Manager
7.5
Removing the Battery Cover and Battery.
7.5.1
Press on the latch on the back of the transceiver and lift off the battery cover.
Lift up on the bottom of the battery and remove from the transceiver.
7.6
Charging the battery
7.6.1
With the battery attached to the phone, plug the connector into the right socket at the base
of the phone.
7.6.2
7.6.3
process:
•
Bars moving
•
Steady
If the battery is completely discharged, the battery icon will only appear 2 to 3 minutes after
you connect the charger.
PCC/VY/691/E/TCD188LVL2/0026/TF/MLD
SERVICE REPAIR SUPPORT
PROCEDURE
Plug the transformer unit into an AC power socket.
The battery icon on the transceiver's display indicates the state of the charge
-
means the battery is charging.
-
means the battery is fully charged.
PCC/VY/691/E/TCD188LVL2/0026/TF/MLD
- 13 -
PHILIPS
Creation
Date : 26/06/2000
Page : 13 of 30
Advertisement
Table of Contents
