D-Link NetDefend DFL-210 User Manual page 121
Network security firewall ver. 1.05
Hide thumbs
Also See for NetDefend DFL-210:
- User manual (495 pages) ,
- Log reference manual (476 pages) ,
- Cli reference manual (213 pages)
Table of Contents
Advertisement
6.2.3. File Transfer Protocol
•
Name: SAT-ftp-inbound
•
Action: SAT
•
Service: ftp-inbound
3.
For Address Filter enter:
•
Source Interface: any
•
Destination Interface: core
•
Source Network: all-nets
•
Destination Network: wan_ip (assuming the external interface has been defined as this)
4.
For SAT check Translate the Destination IP Address.
5.
Enter To: New IP Address: ftp-internal (assume this internal IP address for FTP server has been defined in
the Address Book object).
6.
New Port: 21.
7.
Click OK.
Traffic from the internal interface needs to be NATed:
1.
Go to Rules > IP Rules > Add > IPRule
2.
Now enter:
•
Name: NAT-ftp
•
Action: NAT
•
Service: ftp-inbound
3.
For Address Filter enter:
•
Source Interface: dmz
•
Destination Interface: core
•
Source Network: dmznet
•
Destination Network: wan_ip
4.
For NAT check Use Interface Address.
5.
Click OK.
Allow incoming connections (SAT needs a second Allow rule):
1.
Go to Rules > IP Rules > Add > IPRule
2.
Now enter:
•
Name: Allow-ftp
•
Action: Allow
•
Service: ftp-inbound
3.
For Address Filter enter:
•
Source Interface: any
•
Destination Interface: core
•
Source Network: all-nets
•
Destination Network: wan_ip
4.
Click OK.
108
Chapter 6. Security Mechanisms
Advertisement
Table of Contents
