ZyXEL Communications Zy-Air B-420 Quick Installation Manual page 6

LED COLOR
BDG Red
(SYS)
Green
ZyAIR Blue
ETHN Green
Orange
PWR Green
Orange
To access the ZyAIR, configure your computer's IP address and subnet mask to be in the same range as the
ZyAIR's.
ZyAIR B-420 Wireless LAN Ethernet Adapter and Bridge
Table 1 ZyAIR Front Panel LED Description
STATUS
Blinking The ZyAIR is not ready or rebooting.
On The ZyAIR has a successful wireless bridge connection.
Off The ZyAIR does not have a wireless bridge connection.
Blinking The ZyAIR is sending/receiving data through the wireless LAN.
(Breathing)
On The ZyAIR is ready, but is not sending/receiving data
On The ZyAIR has a successful 10Mbps Ethernet connection
Blinking The ZyAIR is sending/receiving data.
On The ZyAIR has a successful 100Mbps Ethernet connection
Blinking The ZyAIR is sending/receiving data.
Off The ZyAIR does not have a 10/100Mbps Ethernet connection.
On The ZyAIR is receiving power from power supply
On The ZyAIR is receiving power over the Ethernet cable
Off The ZyAIR is not receiving power
The default IP address of the ZyAIR is 192.168.1.11.
DESCRIPTION
6