Features; Layback And Recording Features; Playback Features; Still Picture/Frame-By-Frame Playback - JVC HR-S9500U Instructions Manual

24
EN
Playback

Features

REVIEW
1
REW

High-Speed Search

ACTIVATE HIGH-SPEED SEARCH
1
During playback or still, press FF for forward high-speed
search, or REW for reverse high-speed search.
The search speed is 7 times normal playback speed with
SP recordings, and 21 times normal with EP recordings.
TimeScan will be automatically engaged during high-
speed search with an SP-recorded tape.
If the tape speed changes from SP to EP during high-
speed search the TimeScan mode will change to EP
search mode.
Press TIME SCAN for the opposite direction during
high-speed search of an EP-recorded tape to change
to 7x TimeScan search. (
To resume normal playback, press PLAY.
NOTE:
For short searches, during playback or still, press and hold FF or
REW for over 2 seconds. When released, normal playback resumes.
1 2 3
2
4 5 6
8 9
7
0
4
SKIP SEARCH
FF
PAUSE
TIME SCAN
pg. 38)
PLAYBACK AND RECORDING FEATURES
Still Picture/Frame-By-Frame
Playback
PAUSE DURING PLAYBACK
1
Press PAUSE.
PAUSE
ACTIVATE FRAME-BY-
FRAME PLAYBACK
2
Press PAUSE repeatedly to advance one frame at a time.
OR
Press TIME SCAN £ repeatedly for forward frame-by-
frame playback or TIME SCAN ™ repeatedly for
reverse frame-by-frame playback.
To resume normal playback, press PLAY.
Slow Motion (Pro-Slow*)/
Reverse Slow Motion/Re-
verse Motion Playback
* Smooth slow motion delivering an uninterrupted moving
image without distortion.
ACTIVATE SLOW-MOTION
PLAYBACK
1
For hands-free slow-motion, press TIME SCAN ™
during playback to decrease speed in the forward
direction. Continue to press TIME SCAN ™ to select
the reverse slow motion, reverse play and reverse
search modes.
OR
During still picture, press and hold TIME SCAN £ for
forward slow motion, or press and hold TIME SCAN ™
for reverse slow motion. Release to return to still picture.
To resume normal playback, press PLAY.
Refer to the chart on page 39 for the Play, Slow Motion and
Search speeds that are selected using the TIME SCAN buttons.
During still picture, the normal (mono) sound from
the previous 3 seconds (approx.) will be played back
repeatedly (provided there was at least 6 seconds of
normal playback prior to engaging the still picture
mode).
"TIMESCAN AUDIO" must be set to "ON", or the
sound will not be heard ( pg. 39).