Answering A Video Call - Sharp 802 User Manual

Tip
• If the called party's phone is not video call enabled, you can press F and enter the
phone number again to make a voice call.
• When the call ends, the last call cost is displayed.

Answering a Video Call

When an incoming call is detected, the phone rings.
Press D to answer the call by video or A [Answer] to answer the voice only.
1.
Tip
• When the call is ended, the call cost is displayed.
• If you have subscribed to the Calling Line Identification (CLI) service and the caller's
network sends the number, the caller's number is displayed on the screen. If the caller's
name and number are saved in the Contacts List, the caller's name and phone number
are displayed on the screen.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call you do not wish to answer.
Letting the Caller Know You are Unavailable
1.
Press [Busy] while the phone is ringing to send a busy tone to the caller of an
incoming call letting them know that you cannot answer the call.
Voice Call/Video Call Functions
45