Disassembly Flow Chart; Disassembly Steps - Sony SDM-S76D Service Manual

17" LCD Color Monitor

4. Disassembly flow chart

4.1 Disassembly steps

Notices
1. Lay the monitor on a steady table with a piece of clean cloth mat under it for preventing scratching the panel.
2. Be careful when open the bezel and rear cover with the tool that mentioned above for preventing mangling
them.
3. Put away the screws for preventing rolling on the panel and scratching it.
4. Be careful and don't scratch the connection line when open the shield.
5. Press the interface with a hand and pull or insert the connection line with the other.
Flow Chart
Step1
Prepare
Remove the
rear cover
Figure
27
SDM-S76D/SDM-S76F
Description
Put the monitor on a clean
soft cloth with panel facing
to the table, and then
remove the four screws on
the rear cover.
Pay attention to the top of
the rear cover marked by
red round, open them with a
thin card, and then you will
see two screws. Unscrew
the four screws.