Special Note: During reassembling procedures, ensure the
P.C.B. is seated properly at the locators.
10.12. Disassembly of Main P.C.B.
• • • • Follow (Step 1) to (Step 3) of Item 10.3.
Step 1 Remove 4 screws at the rear panel.
Step 2 Remove 2 screws on Main P.C.B.
Step 3 Detach 19P FFC cable at the connector (CN802) on the
Main P.C.B.
Step 4 Detach 24P FFC cable at the connector (CN501) on the
Main P.C.B.
Step 5 Detach 20P FFC cable at the connector (CN502) on the
Main P.C.B.
Step 6 Detach 14P FFC cable at the connector (CN1101) on
the Main P.C.B.
Step 7 Detach 25P FFC cable at the connector (CN806) on the
Main P.C.B.
Step 8 Detach 11P cable at the connector (CN5802) on the
SMPS P.C.B.
Step 9 Detach 4P cable at the connector (P201) on the DVD
P.C.B.
Step 10 Detach Main P.C.B. from the rear panel.
Step 11 Turn over Main P.C.B. to detach 17P FFC cable at the
connector (CN503) on the Main P.C.B.
Step 12 Detach 22P FFC cable at the connector (CN804) on
the Main P.C.B.
Step 13 Detach 30P FFC cable at the connector (CN803) on
the Main P.C.B.
Step 14 Remove Main P.C.B.
49
SA-BT100P / SA-BT100PC