Preparing for an Encrypted
Videoconference
To start an encrypted videoconference, each terminal has to set "Signal
Encryption Methods" in the Encryption Setup menu to "Standard encryption"
or "Proprietary encryption".
Using standard encryption
1
Select "Standard encryption" for "Signal Encryption Methods"in the
Encryption Setup menu.
Page: 1/1
"Encryption Mode" appears on the screen.
2
Select an encryption mode.
Connect priority
Connects with encryption to a remote party with standard encrypted connection
enabled. Connects without encryption to parties unable to connect with
standard encryption or parties with encryption set to off.
166
Preparing for an Encrypted Videoconference
Encryption Setup
Signal Encryption Methods
Standard encryption
Encryption Mode
Connect priority
ON LINE
POWER
LAN ALERT
Standard encryption
connection available
ON LINE
POWER
LAN ALERT
Standard encryption
connection available
Save
Cancel
Connect with encryption
Connect without encryption
ON LINE
POWER
LAN ALERT
Standard encryption
connection available
ON LINE
POWER
LAN ALERT
Standard encryption
connection unavailable