Additional Operations; Playing/Searching At Various Speeds; Setting The Recording Duration Time - Sony SLV-ED343ME Service Manual

QQ
3 7 63 1515 0
Recording TV programmes using the timer (continued)
Tips
¥ To set the line input video source, you can also use the INPUT SELECT button.
¥ To check, change, or cancel the programme setting, see Checking/changing/
cancelling timer settings on page 48.
¥ To record NTSC signals in EP mode, set the tape speed to LP. Even when timer
recording is set to LP mode, NTSC signals are automatically recorded in EP
mode.
Note
indicators flash in the display window when you press ?/1 with
¥ The and
no tape inserted.
TE
L 13942296513
Basic Operations
44
Playing/searching at various speeds (continued)
Tip
¥ Adjust the picture using the PROGRAM +/— buttons on the VCR if:
- Streaks appear while playing in slow motion.
- Bands appear at the top or bottom while pausing.
- The picture shakes while pausing.
To set tracking to the centre position, press both buttons (+/—) at the same time.
Notes
¥ The sound is muted during these operations.
¥ In the LP mode, noise may appear or there may be no colour.
¥ If the playback mode mark does not appear on the TV screen, press DISPLAY.
¥ The picture may show noise when playing at high speed in reverse.
¥ Do not turn Playback Dial forcibly. It may damage Playback Dial.
www
.
46

Additional Operations

http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Additional Operations

Playing/searching at various speeds

Before you start
¥ Refer to Index to parts and controls for button locations.
Playback Options
To
View the picture during
fast-forward or rewind
Play at high speed
Play at twice the normal
speed
Play in slow motion
To resume normal playback
Press H PLAY.
Using Playback Dial on the VCR
With Playback Dial, you can
operate the following playback
options.
To
View the picture during
fast-forward or rewind
Play at high speed
Q Q
3 6 7 1 3 1 5

Setting the recording duration time

After you have started recording in the normal way, you can have the VCR stop
recording automatically after a specified duration.
Before you start...
• Refer to "Index to parts and controls" for button locations.
1
While recording, press z REC.
The indicator appears in the display window.
2
Press z REC repeatedly to set the duration time.
In SP mode
Each press advances the time in increments of 30 minutes.
0:30
In LP (EP) mode
Each press advances the time as shown below.
0:30
The tape counter decreases minute by minute to 0:00, then the VCR
stops recording and turns off automatically.
To extend the duration
Press z REC repeatedly to set a new duration time.
To cancel the duration
Press z REC repeatedly until the
returns to the normal recording mode.
co
To stop recording
To stop the VCR while recording, press x STOP.
.
Note
• You cannot display the current tape time in the display window when setting the
recording duration time.
1-11
9 4 2 8
Do this
During fast-forward, hold down M FF. During
rewind, hold down m REW.
¥ During playback, briefly press M FF or m REW.
The tape continues to play at high speed.
¥ During playback, hold down M FF or m REW.
When you release the button, normal playback
resumes.
During playback, press ×2.
During playback, press y SLOW.
Playback Dial
Do this
During fast-forward, turn and hold Playback Dial to the
right (M FF). During rewind, turn and hold Playback
Dial to the left (m REW).
¥ During playback, quickly turn and release Playback
Dial to the right (M FF) or left (m REW). The
tape continues to play at high speed.
¥ During playback, turn and hold Playback Dial to the
right (M FF) or left (m REW). When you
release Playback Dial, normal playback resumes.
0 5 8 2 9 9 4 2 8
Additional Operations
1:00 4:00 4:30 Normal recording
Normal
1:00 4:00 5:00 9:00
recording
m
indicator disappears and the VCR
Additional Operations
9 9
continued
9 9
45
47