Playing Back A Tape; Playing Back Other Equipment - JVC CA-UXG45 Instructions Manual

Playing Back a Tape

To insert a tape
You can play back type I tapes.
Push Insert
With the tape side facing front
To start:
To rewind tape:
Wind forward the tape.
Rewind the tape.

Playing Back Other Equipment

To connect other equipment
By using an stereo mini plug cord (not supplied), you can
connect equipment with analog audio output jacks such as a
Digital Audio Player, or a TV, etc.
Stereo mini plug cord (not supplied)
AUX
(front panel)
If the audio output on the other equipment is not stereo
mini plug type,
Use a plug adapter to convert the stereo mini plug to the
corresponding plug of the audio output.
Refer to the manuals supplied with the other equipment.
IMPORTANT
• Always set volume to "VOL-MIN" when connecting or
disconnecting the other equipment.
13
Close
To stop:
Portable audio
device,
Game machine, etc.
To adjust the sound input level from other
equipment
You can adjust the sound input level from the connected
equipment, if the incoming signal is too small or too large.
1 Select AUX for the source.
2 Adjust the input level.
2
sec.
SET/RESUME
AUX LVL 1: Ordinary input level (factory setting).
Suitable for equipment with low output level
(such as a portable audio device).
AUX LVL 2: Decreased input level.
Suitable for equipment with high output level
(such as a DVD player).
memo
• If you feel that the output level from the external
equipment is high, select AUX LVL2.
AUX LVL 1
AUX LVL 2