Usb Application; Usb General Settings - Draytek Vigor2912 Series User Manual

4 . 1 3 U S B A p p
4 . 1 3 U S B A p p
USB storage disk connected on Vigor router can be regarded as a server. By way of Vigor
router, clients on LAN can access, write and read data stored in USB storage disk with
different applications. After setting the configuration in USB Application, you can type the IP
address of the Vigor router and username/password created in USB Application>>USB User
Management on the client software. Then, the client can use the FTP site (USB storage disk)
or share the Samba service through Vigor router.
4 . 1 3 . 1 U S B G e
4 . 1 3 . 1 U S B G
This page will determine the number of concurrent FTP connection, default charset for FTP
server and enable Samba service. At present, the Vigor router can support USB storage disk
with formats of FAT16 and FAT32 only. Therefore, before connecting the USB storage disk
into the Vigor router, please make sure the memory format for the USB storage disk is FAT16
or FAT32. It is recommended for you to use FAT32 for viewing the filename completely
(FAT16 cannot support long filename).
Available settings are explained as follows:
Item
General Settings
l i c a t i o n
l i c a t i o n
n e r a l S e t t i n g s
e n e r a l S e t t i n g s
Description
Simultaneous FTP Connections - This field is used to
specify the quantity of the FTP sessions. The router allows
up to 6 FTP sessions connecting to USB storage disk at one
time.
313 Vigor2912 Series User's Guide