Led Light Receiving Pwb; Punch Horizontal Resist Motor; Mx-Pnx1A/B/C/D - Sharp MX-FNX9 Service Manual

2. MX-PNX1A/B/C/D

A. Punch unit (MX-PNX1A/B/C/D)
(1) Punch unit (MX-PNX1A/B/C/D)
1) Remove the coin screw, and remove the finisher slide stopper.
2) Open the front cover, and slide the inner finisher.
3) Remove the dust box.
4) Remove the punch cover.
2
MX-FNX9 DISASSEMBLY AND ASSEMBLY 6 – 11
5) Remove the punch unit from the main unit.

(2) LED light receiving PWB

1) Remove the punch unit. Refer to A-(1).
2) Remove the PWB holder, and remove the LED light receiving
PWB.

(3) Punch horizontal resist motor

1) Remove the punch unit. Refer to A-(1).
2) Remove the guide cover. Disconnect the connector, and
remove the harness guide.
1
3
2
2