NEC Univerge SV8100 Features And Specifications Manual page 51

UNIVERGE SV8100
Program
Program Name
Number
20-13-20 Class of Service Options
(Supplementary Service) –
Account Code/Toll Restriction
Operator Alert (Restricted
Operation Transfer)
21-01-14 System Options for Outgoing
Calls – Forced Account Code
Inter-digit Timer
21-04-01 Toll Restriction Class for
Extensions
35-05-01 Account Code Setup – Account
Code Mode
35-05-02 Account Code Setup – Forced
Account Code Toll Call Setup
35-05-03 Account Code Setup – Account
Codes for Incoming Calls
35-05-04 Account Code Setup – Hiding
Account Codes
35-06-01 Verified Account Code Table –
Verified Account Code
Account Code – Forced/Verified/Unverified
Description/Comments
Turn Off or On the Operator Alert
when a forced account code is
incorrectly entered.
The system waits this time for a
user to enter a Forced Account
code.
Assign a Toll Restriction Class
(1~15) to an extension.
For each Class of Service (1~15)
select the Account Code Mode.
Enable Account Codes for all calls
or just toll calls (for mode 2 or 3 in
Program 35-05-01).
For each Class of Service (1~15),
enter 1 in this option to Enable
Account Codes for incoming calls.
Enter 0 to Disable Account Codes
for incoming calls. If disabled, any
codes you enter dial out on the
connected trunk.
For each Class of Service (1~15),
enter 1 to have the system hide
Account Codes on an extension
display as they are entered. Enter
0 to have the Account Codes
displayed.
Enter data in the Verified Account
Code Table. You can enter up to
2000 codes from 3~16 digits in
length. For a wild card @, press
the LK 1.
Assigned Data
1
0 = Off
1 = On
(default = 0 for COS
01~15)
0~64800 (seconds)
(default = 3)
Day/Night Mode
1~9 (9 = Power Failure
Mode)
1~15
(default = 2)
0 = Account Codes
disabled (None)
1 = Account Codes
optional
2 = Account Codes

required but not
verified (No verify)
3 = Account Codes
required and verified
(Verify)
(default = 0)
0 = Account Codes for
toll and local calls (All)
1 = Account Codes just
for toll calls (STD)
(default = 0)
0 = Disable Account
Codes for incoming
calls
1 = Enable Account
codes for incoming
calls
(default = 0)
0 = Account Codes
Displayed
1 = Account Codes not
Displayed
(default = 0)
Up to 16 digits
#
Enter: 1~9, 0, , @

(@ = Wild Card)
(default not assigned)
Issue 13.0
Level
2 3






2 - 17