Parts Name Of Remote Controller; Operation Section; Display Section - Toshiba Super MMU-AP0091H Service Manual

3-6. Parts Name of Remote Controller

Operation section

• Using a remote controller, maximum 8 indoor units can be operated.
• After the operation contents have been once set up, the remote controller can be operated by pushing ON/
OFF buttons only.

Display section

In the display example, all indicators are displayed for the explanation.
In reality only, the selected contents are indicated.
• When turning on the leak breaker at the first time, [SET DATA] flashes
on the display part of the remote controller. While this display is
flashing, the model is being automatically confirmed. Accordingly, wait
for a while after [SET DATA] display has disappeared, and then use
the remote controller.
2
3
4
5
6
7
1
SET DATA display
Displayed during setup of the timer.
2
Operation mode select display
The selected operation mode is displayed.
3
CHECK display
Displayed while the protective device works or a
trouble occurs.
4
Timer time display
Time of the timer is displayed. (When a trouble
occurs, the check code is displayed.)
5
Timer SETIN setup display
When pushing the Timer SETIN button, the
display of the timer is selected in order of
→ [OFF] repeat OFF timer →
[OFF]
→ No display.
[ON]
6
Filter display
If "FILTER " is displayed, clean the air filter.
7
TEST run display
Displayed during a test run.
8
Flap position display
Displays flap position.
1
8
Central control
SET DATA
UNIT No.
SETTING TEST
R.C. No.
9
SWING display
Displayed during up/down movement of the
flap.
10
Set up temperature display
The selected set up temp. is displayed.
11
Remote controller sensor display
Displayed while the sensor of the remote
controller is used.
12
PRE-HEAT display
Displayed when the heating operation starts
or defrost operation is carried out.
While this indication is displayed, the indoor
fan stops or the mode enters in LOW.
13
No function display
Displayed if there is no function even if the
button is pushed.
14
Air volume select display
The selected air volume mode is displayed.
35
SET DATA
UNIT No.
SETTING TEST
R.C. No.
UNIT
SET CL
CODE No.
10
12
14
(AUTO)
(HIGH)
(MED.)
(LOW)
CODE No.
Display
section
Operation
section
9
11
13