LG AMNH096BTG0 Manuals page 55

4. Duct Type Indoor Unit
1) Indoor Unit Installation
• Select and mark the position for fixing bolts.
• Drill the hole for set anchor on the face of ceiling.
• Insert the set anchor and washer onto the suspen-
sion bolts for locking the suspension bolts on the ceil-
ing.
• Mount the suspension bolts to the set anchor firmly.
• Secure the installation plates onto the suspension
bolts (adjust level roughly) using nuts, washers and
spring washers.
CAUTION: Tighten the nut and bolt to
prevent unit falling.
Copyright ©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Old building
• Local supply
➀ Set anchor
➁ Plate washer
➂ Spring washer
➃ Nut
➄ Suspension bolt
- 55 -
Installation
New building
1 Set anchor
2 Plate washer
3 Spring washer
4 Nut
5 Suspension
bolts
- M10
- M10
- W3/8 or M10
- W3/8 or M10
LGE Internal Use Only