Launch Applications; Power Button; Suspend Mode - Motorola ET1 Quick Start Manual

Launch Applications

To launch an application:
Touch the Launcher icon. The Launcher screen displays.
1.
Touch an application icon to launch the application.
2.
Configure the ET1
To configure ET1 settings, touch
Enterprise Tablet User Guide and Integrator Guide for
information on configuring the ET1.
6
Launcher
> Settings. Refer to the ET1

Power Button

Use the Power button to place the ET1 in suspend mode, battery
swap mode, to reset the ET1 or to power off the ET1.

Suspend Mode

Press and release the Power button to place the ET1 in suspend
mode. In Suspend Mode the ET1 turns off the display and goes
into a low power state to conserve battery power.
Press and release the Power button to wake the ET1, and then
slide up to unlock the screen.
Battery Swap Mode
Do not remove microSD card during Battery Swap
CAUTION
mode.
Before replacing the battery, place the ET1 in Battery Swap
Mode. Press and hold the Power button until the Device options
dialog box appears then touch Battery swap.
The Decode LED lights red. When the LED turns off, it is safe to
remove the battery.
Reset
Reset the ET1 if applications stop responding. Press and hold
the Power button until the Device options dialog box appears
then touch Reset.